Popular Articles
Program Ultra Tuff Receiver with an OT 300 Transmitter
Below is a guide to programming your pet's receiver using an OT 300 transmitter. Video Link - https://youtu.be/94wKLqkjIQg Programming: 1. Note the number that you see on the LED display of your transmitter. 2. Put the OT 300 transmitter into ...
Dogtra Collar Correction Testing
To test the correction on a Dogtra collar, start by taking out the test light. Place the test light on the two contact posts securely. Press the constant button (or nick button) and increase the strength of the correction via the rheostat dial. As ...
Training Flags - How to Place
Take the Pet Stop receiver in one hand and the flags in the other hand Walk toward the boundary When the receiver (collar) beeps, you are at the edge of the signal field Place the flags about 6 inches inside the beep zone Position flags about 10ft ...
Dogtra Pairing Guides
When a customer buys a Dogtra additional receiver for their system or replaces a lost transmitter, they have to code the units to work together. Dogtra had the Code Setting Guide on their Dogtra.com site https://dogtra.com/pages/dogtra-pairing-guides
Adjust the Transmitter Signal Field Width
If you have the OT 200 transmitter, just touch the top button to widen the field or the bottom button to make it narrower. If you have the OT 300 transmitter, press and hold the middle button until period dots appear after the numbers on the display. ...