Assembling the Pet Fence Collar to the Receiver

Here is how you can assemble the collar and receiver:

1. Place the collar holes over the probe inserts. Be sure the receiver case is outside of the collar.

2. Place the plastic backstrip over the probe inserts.

3. Attach the posts by screwing them snugly into the receiver inserts.

NOTE: Be careful not to over-tighten the posts. Over-tightening can cause damage to the posts and the receiver case.

• Related Articles

• Program Ecolite HO Receiver with an OT 300 Transmitter

  Below is a guide to programming your pet's receiver using an OT 300 transmitter. Video Link - https://youtu.be/p3QTTmYXI0A Programming: 1. Note the number that you see on the LED display of your transmitter. 2. Put the OT 300 transmitter into ...

• Program Ultra Tuff Receiver with an OT 200 Transmitter

  Below is a guide to programming your pet's receiver using an OT 200 transmitter. Video Link - https://youtu.be/JtTWcrV7I-g Programming: 1. Note the number that you see on the LED display of your transmitter (Mounted on the wall). Pro Tip - Also, you ...

• Program Ultra Tuff Receiver with an OT 300 Transmitter

  Below is a guide to programming your pet's receiver using an OT 300 transmitter. Video Link - https://youtu.be/94wKLqkjIQg Programming: 1. Note the number that you see on the LED display of your transmitter. 2. Put the OT 300 transmitter into ...

• Program Ecolite HO Receiver with an OT 200 Transmitter

  Below is a guide to programming your pet's receiver using an OT 200 transmitter. Video Link - https://youtu.be/JtTWcrV7I-g Programming: 1. Note the number that you see on the LED display of your transmitter (Mounted on the wall). Pro Tip - Also, you ...

• Program Ecolite HO Receiver with an OT 200 Transmitter

  Below is a guide to programming your pet's receiver using an OT 200 transmitter. Video Link - https://youtu.be/JtTWcrV7I-g Programming: 1. Note the number that you see on the LED display of your transmitter (Mounted on the wall). Pro Tip - Also, you ...