Adjust the Transmitter Signal Field Width
If
you have the OT 200 transmitter, just touch the top button to widen the field or the bottom button to make it narrower.
If you have the OT 300 transmitter, press and hold the middle button until period dots
appear after the numbers on the display. When they appear, push the top button
to increase the signal field width, or the bottom button to decrease the signal field width. touch middle button to set.
Related Articles
Program Ultra Tuff Receiver with an OT 200 Transmitter
Below is a guide to programming your pet's receiver using an OT 200 transmitter. Video Link - https://youtu.be/JtTWcrV7I-g Programming: 1. Note the number that you see on the LED display of your transmitter (Mounted on the wall). Pro Tip - Also, you ...
Program Ecolite HO Receiver with an OT 200 Transmitter
Below is a guide to programming your pet's receiver using an OT 200 transmitter. Video Link - https://youtu.be/JtTWcrV7I-g Programming: 1. Note the number that you see on the LED display of your transmitter (Mounted on the wall). Pro Tip - Also, you ...
Program Ecolite HO Receiver with an OT 200 Transmitter
Below is a guide to programming your pet's receiver using an OT 200 transmitter. Video Link - https://youtu.be/JtTWcrV7I-g Programming: 1. Note the number that you see on the LED display of your transmitter (Mounted on the wall). Pro Tip - Also, you ...
Program Ecolite HO Receiver with an OT 200 Transmitter
Below is a guide to programming your pet's receiver using an OT 200 transmitter. Video Link - https://youtu.be/JtTWcrV7I-g Programming: 1. Note the number that you see on the LED display of your transmitter (Mounted on the wall). Pro Tip - Also, you ...
Program Ecolite HO Receiver with an OT 300 Transmitter
Below is a guide to programming your pet's receiver using an OT 300 transmitter. Video Link - https://youtu.be/p3QTTmYXI0A Programming: 1. Note the number that you see on the LED display of your transmitter. 2. Put the OT 300 transmitter into ...