Training Flags - How to Place

Training Flags - How to Place

Take the Pet Stop receiver in one hand and the flags in the other hand

Walk toward the boundary

When the receiver (collar) beeps, you are at the edge of the signal field

Place the flags about 6 inches inside the beep zone

Position flags about 10ft apart ( 3 paces) 


    • Related Articles

    • Dogtra GPS Fence

      The Dogtra GPS Fence is a fully wireless containment system that uses GPS technology to create customizable boundaries without the need for buried wires. Controlled through a simple mobile app, it allows you to set safe zones for your dog while ...

    • Assembling the Pet Fence Collar to the Receiver

      Here is how you can assemble the collar and receiver: 1. Place the collar holes over the probe inserts. Be sure the receiver case is outside of the collar. 2. Place the plastic backstrip over the probe inserts. 3. Attach the posts by screwing them ...

    • Dogtra 280X

      The Dogtra 280X 1-Dog Unit is a rugged, waterproof remote-controlled training collar for dogs 10 lbs and up. It provides tone, vibration, and adjustable stimulation to communicate commands clearly during training. ...

    • Dogtra Collar Correction Testing

      To test the correction on a Dogtra collar, start by taking out the test light. Place the test light on the two contact posts securely. Press the constant button (or nick button) and increase the strength of the correction via the rheostat dial. As ...

    • Dogtra Pairing Guides

      When a customer buys a Dogtra additional receiver for their system or replaces a lost transmitter, they have to code the units to work together. Dogtra had the Code Setting Guide on their Dogtra.com site https://dogtra.com/pages/dogtra-pairing-guides